Gira KNX motion detector

The next generation of Gira KNX motion detectors for normal and high installation areas provides even greater convenience and security throughout the building. KNX motion detectors are used for the on-demand control of different functions depending on the movements of people.

KNX motion detector with Standard top unit

With KNX motion detector Standard, lighting, heating, ventilation, air-conditioning systems, blinds and even scenes, for example, can be easily and conveniently activated when a room, hallway, or staircase is entered. If no motion is detected, they can be automatically switched off again – everything without manual operation.

KNX motion detector with top unit Komfort

The Gira KNX motion detector Komfort also features a built-in temperature sensor for measuring the ambient temperature. This also enables the heating or cooling system to be controlled in WC rooms, for example, in addition to automatic lighting control. In this case, the room temperature is specified externally, e.g. via a display.

  • Wide range
  • Top unit lenses for mounting heights of 1.10 m and 2.20 m
  • Can be set as an individual device, a main unit or an auxiliary unit
  • Suitable for all Gira System 55, Gira F100 and TX_44 design lines
  • Precise motion detection
  • Daylight-dependent lighting control
  • Short-term presence function for conference and training rooms
  • Wide range
  • Top unit lenses for mounting heights of 1.10 m and 2.20 m
  • Can be set as an individual device, a main unit or an auxiliary unit
  • Suitable for all Gira System 55, Gira F100 and TX_44 design lines
  • Precise motion detection
  • Daylight-dependent lighting control
  • Short-term presence function for conference and training rooms
  • Convenient control via infrared remote control
  • Easy switching between configured functions
  • Integrated temperature sensor