The Expert Software 4.5.0 is to be used in conjunction with the following end devices:
HomeServer 4
FacilitiyServer 4
HomeServer 3
FacilityServer 3
HomeServer 2
Iso for HS2.NET eleminated. This generation of devices cannot be supported any longer.
QuadClient / QuadConfig
New features
Increased password security
Improvement
Basic setting of design selection In the basic settings of QuadConfig the selection of active and inactive designs has been changed. From version 4.5.0:
Design 0 – active
Design 1 – inactive
Design 2 – active
Design 3 – inactive
Design 4 – active
Design 5 – active
Design 6 – active
Project check
Revised project check even when QuadConfig is running. Example: Changes to a communication object in Expert are directly adopted in QuadConfig without the need to restart the program.
Messages in the message window (error, warning, info) are reliable and synchronous, i.e. no display of ("wrong positive") error messages whose cause has already been "rectified".
Loading / saving projects
In rare cases it could occur that a project file was read incompletely – e.g. due to a defective function template having been loaded. Subsequent writing could then have led to data loss.
The read and write function for the project data was revised, the user will now be made aware of such errors. Written project data will only be adopted if successful.
In addition, log files can be opened from QuadConfig. In case of an error, these offer detailed information on the cause of the error.
Function template 1-107 – Shutters Awnings Roof window
Inverse motion direction for roof windows can now be selected as a response.
Function template 1-103 – Heating Plus (operationg mode switching)
