New Gira products.

The new Gira E1 design line is a style-defining highlight in almost any environment – a minimalist and natural design which is nevertheless striking due to its soft contours.

Available from: 09/2024

• A simple, functional and striking design
• Can be used for over 300 functions from the Gira System 55
• Available in seven colours

Automated lighting control is an key component of energy-efficient building technology. New to the range is the Gira System 3000 motion detector top unit 1.1 m Standard with delay time. Delay times of between 10 seconds and 30 minutes can be individually set as required.

• Can be activated for daytime operation irrespective of brightness
• Different adjustment and application options
• Range of detection individually adjustable
• Can be combined with all Gira design lines

Available 

The Gira overvoltage protection module can be easily retrofitted to protect electrical devices against transient surges. The ring module is inserted at the rear of the socket outlet and will also protect other socket outlets, provided that the cable length is less than 5 m.

• Versatile – can be attached to almost all socket outlets
• Compact design guarantees sufficient wiring space in the device box.
• Integrated warning tone if there is a fault with the socket outlet
• 3 kA discharge capacity

Available from: Q3/2024

With the Gira E2 in light grey, we are introducing the first sustainable design line. The plastic parts of this design line consist primarily¹ of recycled materials, reducing the carbon footprint by around 54% in comparison to new materials.²  

Available: upon request 

• Saves resources and reduces CO2
• Produced in-house from recycled materials
• Many features from the Gira System 55 are also available in the colour of light grey upon request

With the option of seamlessly integrating up to five wall boxes from different manufacturers into the KNX system, Gira Eco is setting new standards. Dynamic load management protects the household connection against overload. The charging current is prioritised and automatically reduced if necessary.

Available from: Q3/2024

• Dynamic load management
• Static load management
• Supports five charging points
• Connection via IP or RS485 (Modbus)

The new Gira Modbus logic module for the Gira X1 allows abundant energy data to be comprehensively retrieved, for example data from charging stations, PV systems, storage batteries, heating elements and heat pumps. The data is displayed as an overview and can be integrated into the KNX system.

Available

Splendid Minds GmbH provides a simple option for visually displaying all the energy data available in the KNX system, such as, for example, energy consumption or a performance overview of the photovoltaic system, as well as other values. The graphs and diagrams can be displayed via the display module on the Gira Smart Home App.

Available

The DALI gateway colour for KNX is a reliable and versatile solution for switching and dimming coloured lighting according to the DALI2 standard. In addition to precise adjustment of the colour temperature with DALI Device Type 8 for Tunable White, Human Centric Lighting (HCL) technology can also be used for dynamic lighting.

Available

• Lighting control with HCL technology, particularly suitable for the healthcare sector, for example
• Compact design as a 1-gang or 2-gang version for up to 128 lights
• Colour Transition Mode enables dynamic lighting control
• Easy and time-saving initial start-up

The new Gira F1 module serves as a KNX bridge, enabling secure connection of several self-contained KNX systems. It is particularly suitable for use in larger properties and also for commercial applications such as shopping centres, where self-contained KNX systems need to communicate with one another.

• Connects several independent KNX systems as a KNX bridge
• Sends messages that affect all residents, such as upcoming lift maintenance or KNX telegrams from shared functions, such as weather stations, to the private KNX system
• Compatible with KNX Secure
• Start-up using the ETS

Available from: Q1/2024

Gira KNX Secure button interfaces facilitate the integration of conventional products with zero-voltage contacts into the KNX system. This includes conventional operating elements such as buttons and switches and also reed contacts for evaluating window status. 

• Available as a 2-gang/4-gang/8-gang version (each available in Standard and Komfort versions)
• Automatic removal of oxide layer on the connected contacts
• Straightforward combination of adjacent channels for the button and door/window contact functions

Available from: 03/2024

Fewer faults, quicker installation: The wiring in the switching cabinet is significantly optimised with the phase busbars for the switch/blind actuators for Gira One and KNX. In many cases, the customary wire jumpers can be replaced with a phase busbar, which significantly reduces the cabling required.

• Improved installation due to reduced wiring complexity on the actuators
• Can be flexibly shortened using fixed end caps
• Available for switch and blind actuators 16/8 and 24/12
• Compact, space-saving design
  
  

Available from: 06/2024

The area/line coupler for KNX connects the data from two KNX lines to one another. This enables cross-line communication between KNX devices. Similarly, the completely new segment coupler function enables better structuring, in particular in larger KNX installations.

• New compact design with a TE enables space-saving installation in the switching cabinet
• Considerably reduced ETS start-up times in larger installations
• Supports KNX data secure proxy function for cross-line group communication between KNX devices that use KNX data secure and devices that do not use it

Available from: 06/2024

Even more choice: The modular Gira System 106 offers countless functional modules which can be combined to suit any requirements. During installation, too, a choice can be made between a flush façade and surface mounting. The range has now been expanded to include the elegant, timeless black matt colour. 

Available 

• New, particularly attractive colour in the design system
• Durable powder coating
• Matt, particularly scratch-resistant surface structure

The Gira F1 module enables a secure connection between the building network and the private networks for individual apartments in the network-based SIP communication of larger door communication systems. When the doorbell rings, only the necessary video door calls from the door station are unlocked and forwarded to the home station in the private network, for example to the Gira G1. All other IP connections and access remain disabled.

• Systematic separation of the networks prevents access to the private network
• Supports SIP and SIPS
• Easy, browser-based start-up

Available from: Q1/2024

The enhanced Gira DCS IP gateway features a new powerful main processor with faster memory. It guarantees easy integration of existing or modern IP cameras with the conventional h.264 standard, of the Gira G1, of computers and SIP telephones.

• It enables simple operation of the Gira door communication system via smartphone, even when you're out and about
• Highly compatible with the use of IP cameras

Available 

The Gira weather station for KNX measures temperature, rainfall, wind speed and brightness and enables automated weather-based control of the building, e.g. of the blinds, shutters and lighting, which prevents damage and increases energy efficiency.  

Available from: 07/2024

• Sun protection for up to 8 façades
• 10 flexible sensor channels for safety alarms such as wind, rain and temperature
• Weather sensor communicates with up to 20 weather control units
• Day-night switchover
• KNX Secure Standard