Operating system: Windows 7, Windows 8, Windows 10
Free hard drive space: at least 1 GB
RAM: at least 2 GB
Software platform: at least Microsoft .NET 4.5
Supported devices
The Expert Software 4.10.1 is to be used in conjunction with the following end devices:
Gira HomeServer 4
Gira FacilityServer 4
Update information
It is only possible to update to firmware version 4.10.1 from the following version:
4.10.0.200117
4.9.0.190612
Troubleshooting
Expert/firmware
Firmware versions 4.9.0 or 4.10.0 are required in order to update to version 4.10.1 Gira HomeServers with index status <=I20 may no longer boot from a version earlier than 4.9.0.190612 after updating to firmware version 4.10.0.200117. Gira HomeServer can be made bootable again using a bootable USB stick containing version 4.8.0, 4.9.0 or 4.10.0. If at least firmware version 4.9.0.190612 is present, this step is no longer necessary.
The axis labels were not displaying correctly in diagrams in the user-defined visualisation (HS client, HTML visualisation or Ajax visualisation). This has been remedied with firmware version 4.10.1.200330.
The maximum size for camera images has been increased from 1 MB to 10 MB.
Note: If you have already installed firmware version 4.10.0.200117 and do not make use of any user-defined visualisation including one or more diagrams with axis labels, it is not necessary to carry out the firmware update. When uploading a project, no locking was incorporated.
QuadClient
When switching between different function views, parts of the most recently displayed view might also have been shown in the currently active view. This has been remedied with version 4.10.1.
Smaller values for switching times have been included for the dimmer function template in firmware version 4.10.0, as a result of which, switching times in existing projects have been offset. The 4.10.1 update corrects this offset, so that the set values will once again be transmitted.
