Downloads & Software-Updates


Gira L1 firmware update


Order No. 2070 00

ZIP, 42.540 Kb

Version: 2.0.465

Date: 12.01.2016


Important information

After the firmware update the Gira Logic Module is protected by a device password. The password is "device". Please change the device password during configuration.

New functions

  • Logic functions:
    a new node in the node library: RS-Flipflop.
  • Timers revised:
    20 timers with 10 switching times each are available
  • Scenes revised:
    20 scene sets with 64 scenes each are available
  • KNX group address data points expanded:
    The KNX group address data points were increased from 150 to 300. You can use up to 480 data points in a project. (300 KNX group address data points, 180 discretionary device data points).


  • PID controller:
    Controller behaviour corrected when the "Active" parameter is set to "0".
  • Telegram delayer:
    The telegram delayer's runtime behaviour has been improved.
  • Position of the sun node:
    The position of the sun node now uses the correct time.
  • The node input is now set correctly upon node initialisation via variable data point.
  • Communication object / device data point "Runtime":
    Time is now displayed correctly.
  • Teach-in of scenes:
    Teach-in of scenes in conjunction with listening group addresses has been improved.

To perform the update the Gira Project Assistant V 2.1 is required. It is recommended to always use the latest available GPA version. Please follow the instructions in the enclosed documentation.