Gira wireless module for Gira Dual Q smoke alarm device

Wireless networking and control

The Gira wireless module is used for the wireless connection of Dual Q smoke alarm devices. If one smoke alarm device detects a fire, all the assigned smoke alarm devices sound the alarm. 

A transmission range of 100 m (free field) can be achieved per module. If a smoke alarm device with the wireless module is programmed as a repeater, the range can be expanded even further.
Dual Q Gira smoke alarm device


Simultaneous alarm throughout the house

A total of 40 Gira Dual Q smoke alarm devices can be networked with one another via the Gira wireless module. When the smoke alarm device detects the dangerous accumulation of smoke or heat, a signal is transmitted to all further smoke alarm devices and an alarm is triggered throughout the whole building. This means that even if you’re in the attic, you will still get to hear if things get dangerous in the cellar.


Installation

The wireless module is plugged into the interface of the Gira Dual Q smoke alarm device. The networking terminals of the smoke alarm device can continue to be used when the module is attached. This allows combined lines to be set up (wired or via radio).


Technical data

Power supply:
via 3-V lithium battery Type (CR2/3 AA) (included in scope of supply)
Transmission frequency:
433.42 MHz, ASK
Send range:
type. 100 m (in free field)
Temperature range:
-5 °C to +50 °C
Back to top